Walker Rider Lawnmowers MBS26, Руководство пользователя

Страница: 42 / 104

Maintenance Instructions
38
MAINTENANCE SCHEDULE CHART - RECOMMENDED SERVICE INTERVALS - MODEL MBS26 AND MBS
Service Item
Daily
25
Hours
100
Hours
200
Hours
400
Hours Yearly
Every
2 Years
Ref.
Page
Check Engine Crankcase Oil Level x 40
Check/Clean Engine
Air Cooling System*
x 48
Check Air Filter Restriction Gauge x 46
Clean Grass Buildup Under Deck x 49
Service Mower Blades x 53
Check Security of Air Filtration
Components
x 52
Lubricate Grease Fittings and
Oil Points*
x 43
Check Transaxle Fluid x 42
Check Tire Pressure x 53
Check Drive Belts
(Engine/PTO, Ground Drive)
x 56
Check Safety System x 55
Check Battery Electrolyte Level x 52
Change Engine Crankcase Oil**
x
Δ
40
Check Air Filter Element *** x 47
Clean Engine Cooling Fins x 48
Check Security of Drive Tire
Mounting Nuts (75 to 85 ft-lbs.)
x 22
Clean Transaxle Cooling Fins x 51
Check FSC Friction Lock x 55
Check Blade Brake Action x 55
Change Engine Oil Filter x 40
Check/Regap Spark Plugs x 54
Change Transaxle Oil and Filter
x
ΔΔ
42
Check Fuel Lines and Clamps x 54
Replace Air Filter Element
and Dust Ejection Valve ***
x 47
Service Battery x 52
Replace Fuel Filter x 59
Service Solenoid Shift Starter x ΔΔΔ
Check PTO U-Joints for
Wear/Looseness
x 55
Replace Fuel Lines and Clamps x 54
∗ More often in extremely dusty or dirty conditions
(Refer to notes about air cleaner element under
IMPORTANT TIPS FOR CARE OF
KOHLER ENGINE)
∗∗ Change engine oil and filter after first 8 hours
of operation of a new engine (break-in period)
∗∗∗ Air cleaner is remote mounted Cummins/Fleetguard
OptiAir™ unit, replace filter every year
Δ
Change oil every 50 hours when operating
in dry, dirty conditions
ΔΔ
Initial oil and filter change at 75-100 hours
ΔΔΔ
See your Walker dealer for this service or refer to the
Walker Service Manual
CAUTION
When performing maintenance with the
mower body raised, a safety prop should
be installed from back of body to chassis
frame (fail-safe protection in case of fail ure
of body lift support).
CAUTION
Maintenance procedures requiring special training or
tools should be performed by a trained technician.