background image

 

5.

 

Quick-start guide 

ADVICE: 
The detailed instruction for the following operations can be found in the respective chapters in this 
instruction manual.   
Keep the sequences of the following operation steps when using the device for the first time to avoid 
damages on the device.   

  WARNING 

Please note the safety notes in the respective chapters throughout operation. 

 

Unpack and unfold the device 

 

Fold to a cube 

 

Screw lamps in and out   

 

Connect to power supply 

 

Switch on device 

 

Switch lamps on and off 

 
 

 

6.

 

Preparation for operation 

6.1

 

Unpack and unfold the device. 

1.

 

Open the bag and unfold the sides.   
 

2.

 

Take out the loose side (3) with the front camera 
opening (operation front). 
 
 

6.2

 

Fold to a cube 

1.

 

The side with the rounded edges must show forward.   

2.

 

Put the loose side (3) with the front camera opening 
(operation front) on the side with the rounded edges.   

3.

 

Put side (1) upwards to the rear side of the cube.   

4.

 

The side parts (2) can be closed with the front side (3) 
now. 

5.

 

Finally, you can close the lid with the upper camera 
opening (3) according to your requirements.   

 

Содержание 16638













Отзывы: