Cleaning and Maintenance
16
General
Clean the Target Top / Range regularly. A clean appliance looks better, will last longer and will
perform better. Carbonised grease on cooking surface will hinder transfer of heat from cooking
surface to food. This will result in loss of cooking efficiency.
DO NOT use water on Target Top while this item is still hot as warping and cracking may
occur. Allow Target Top / Range to cool down and then remove for cleaning
.
NOTE:
DO NOT use abrasive detergents, strong solvents or caustic detergents as they could
corrode or damage the target top / range.
In order to prevent rust forming on Target Top, ensure that any detergent or cleaning
material has been completely removed after each cleaning. Appliance should be switched
‘On’ briefly to ensure Target Top becomes dry.
To keep your Target Top / Range clean and operating at peak efficiency, follow procedures shown
below:-
After Each Use
Clean Target Top / Range with a stiff nylon brush or a flexible spatula to remove any build up of
carbon.
Daily Cleaning
1.
Thoroughly clean splash back, interior and exterior surfaces of Target Top / Range with hot water, a
mild detergent solution and a soft scrubbing brush.
2.
Clean control panel with a damp cloth lightly moistened with a solution of mild detergent and water.
Wipe dry with a clean dry cloth.
3.
Brush Target Top (cast iron) with a soft bristled brush followed by wiping with a cloth to prevent
accumulation of carbon.
4.
Remove drip tray and clean with a mild anti bacterial detergent and hot water solution using a soft
bristled brush. Dry drip tray thoroughly with a dry cloth.
5.
Dry Target Top / Range thoroughly with a dry cloth and polish with a soft dry cloth.
Weekly Cleaning
NOTE:
If Target Top / Range usage is very high, we recommend that weekly cleaning procedure is
carried out more frequently.
Ensure protective gloves are worn during cleaning process.
DO NOT use harsh abrasive detergents, strong solvents or caustic detergents as they will
damage Target Top / Range.
DO NOT use water on Target Top / Range while it is still hot as cracking may occur. Allow
castings to cool and remove for cleaning.
Always turn off the electrical and gas supply before cleaning.
This appliance is not water proof.
Do not use water jet spray to clean interior or exterior of this appliance.
Caution
Содержание RNB8110GE
