Waldorf RNB8110GE, Инструкция по установке и эксплуатации

Страница: 14 / 32

Installation
12
Commissioning
1. Before leaving the new installation;
a. Check the following functions in accordance with operating instructions specified in ‘Operation’
section of this manual.
 Light the Target Top Pilot Burner.
 Light the Target Top Main Burner.
 Check the Target Top Low Fire Burner operation.
 Check the Target Top High Fire Burner operation.
 Check the Oven Heating.

Check the Oven Thermostat operation.
 Check the Oven Fan operation (GEC models only).
 Check current draw and loading for equipment. Refer specification section for correct
electrical requirements.
 C heck all connections are correct and that all cover panels have been re-fitted.
 Ensure that this instruction manual is left with appliance.

Ensure that all relevant details and contacts have been added to front of this manual.
b. Ensure operator has been instructed in areas of correct lighting, operation, and shutdown
procedure for appliance.
2. This manual must be kept by the owner for future reference, and a record of
Date of Purchase,
Date of Installation
and
Serial Number of Appliance
recorded and kept with this manual.
(These details can be found on Rating Plate attached to front right hand corner of
bottom sill. Refer to ‘Gas Connection’ section) .
NOTE:

If for some reason it is not possible to get appliance to operate correctly, turn ‘Off’
electrical power and gas supply and contact supplier of this appliance.

Make sure that electrical and gas supply are turned ‘Off’ before any service or maintenance
work is carried out on appliance.