29
Functions of the luminaire
ENG
6. Functions of the luminaire
Depending on the luminaire model, the
luminaire has different functions.
If you want to find out which functions the
luminaire has, see chapter 2 “Model over-
6.1 Operating functions
Switchable
This function can be used to switch the
luminaire on and off.
Dimmable
This function is used to change the bright-
ness of the luminaire.
Boost function
This function allows you to operate the indi-
rect light at the maximum power.
6.2 Light management
LUM CONNECT MANAGE light manage-
ment systems combine presence and day-
light sensors. The luminaire is only switched
on when the sensors detect the presence
of a person in the room and the intensity
of the daylight is insufficient.
Mode of operation
If the sensors detect the presence of a
person in their detection range and the
intensity of the daylight is not sufficient,
the luminaire is switched on automatically.
If the sensors detect no motion for 10 min-
utes in their detection range, the luminaire
is switched off automatically.
If the brightness in the detection range of
the daylight sensor changes, LUM CON-
NECT MANAGE adjusts the brightness of
the luminaire such that the work area is illu-
minated homogeneously.
Manual inputs on the luminaire, such as
manual switch-on and off, always take pri-
ority over the automatic light management
until the detection range of the sensors is
left for ten minutes.
HFMD sensor
The presence sensor of the light manage-
ment system HFMD uses high frequency
technology and detects minimum move-
ments in its detection range.
Fig. 9: Detection range of the HFMD sensor.
PIR sensor
The motion detector of the light manage-
ment system PIR uses passive infrared
technology and detects larger movements
in its detection range.
Fig. 10: Detection range of the PIR sensor.
VTL
VTL is an independently functioning light
management system. VTL is used to sim-
ulate the natural course of daylight with
the corresponding colour temperature and
illuminance. This positively influences hor-
mone production and supports the biologi-
cal rhythm in a natural way.
If you want to learn
m o r e a b o u t V T L ,
simply scan this QR
code or visit us at:
www.waldmann.com.
Parameterisation
You can adapt the LUM CONNECT MAN-
AGE light management systems to your
individual requirements: read the operating
instructions of the POWER control which
can be found in the service area of our
homepage www.waldmann.com.
