22
Product overview
ENG
2. Product overview
A
B
C
D
Fig. 1: Product overview TALK MODUL EnOcean.
No. Designation
A
Pushbutton connection for aerial
B
Status LED
C
Pushbutton
D
EnOcean QR code
3. Preparing installation
3.1 Updating firmware
Before installation, the following compo-
nents of the product into which the wire-
less module is installed must be updated.
Controller firmware
TALK MODUL Bluetooth firmware
X
Carry out a firmware update using the
LIGHT ADMIN app.
4. Installing TALK MODUL
EnOcean (YARA)
4.1 Attaching the EnOcean QR
code
There is a label with the EnOcean QR code
included separately in the packaging. The
EnOcean QR code contains information
about the wireless module according to
EnOcean standard. Among other things, it
includes the device ID.
X
Affix the separately included label
D
with the EnOcean QR code on the col-
umn underneath the service flap see
Fig. 2.
The TALK MODUL EnOcean can be
identified without having to open the
service flap.
NOTE:
The device ID of the built-in wire-
less module is also shown in the LIGHT
ADMIN app.
4.2 Disconnecting the luminaire
from the power supply
X
Pull the mains plug.
4.3 Opening the service flap
NOTICE
Property damage due to improper
operation.
Destruction or damage to the sensor for
temperature and air humidity.
X
Release the service flap at the
opening with the wireless symbol.
X
With the service flap opened, do
not
remove or overstretch the rib-
bon cable.
