5
1.2.4. Deleting an OPERATOR code
Procedure
1. With the lock open and the opening handle in the open position, press the
MODE key; PRG-MOD appears in the display.
2. Enter existing MASTER-CODE (for initial programming 0 0 1 2 3 4 5 6),
confirm with ENTER, TIME appears in the display.
3. Press arrow key until CODE appears, confirm with ENTER.
4. MASTER appears in the display, press the arrow key until BEDIENR
appears, confirm with ENTER.
5. Select OPERATION 11-19 or OPERATION 21-29 with the arrow key.
6. Press DEL key, the display shows DELETE, select YES with arrow key and
confirm with ENTER.
15. ACCEPT appears in the display and the respective opening code is deleted.
exit the menu by pressing the i key 2-3 times.
1.2.5. Deleting a MANAGER code
Procedure
1. With the lock open and the opening handle in the open position, press the
MODE key; PRG-MOD appears in the display.
2. Enter existing MASTER-CODE (for initial programming 0 0 1 2 3 4 5 6),
confirm with ENTER, TIME appears in the display.
3. Press arrow key until CODE appears, confirm with ENTER.
4. MASTER appears in the display, press arrow key until MANAGER appears,
confirm with ENTER.
5. Select MANAGER 1 or MANAGER 2 with the arrow key.
6. Press the DEL key, the display shows DELETE Select YES with the arrow
key and confirm with ENTER.
7. ACCEPT appears in the display and the respective opening code is deleted.
exit the menu by pressing the i key 2-3 times.
1.2.6. Time menu (setting time and date)
Procedure
1. With the lock open and the opening handle in the open position, press the
MODE key; PRG-MOD appears in the display.
2. Enter master code (for initial start-up 0 0 1 2 3 4 5 6) and confirm with
ENTER.
3. TIME appears in the display, confirm with ENTER.
4. With digits enter current time and confirm with Enter.
5. SAVE, YES? Confirm with ENTER and AKEZPT is displayed.
6. Jump to DATE with right arrow key, confirm with ENTER.
7. Enter the date with digits, confirm with ENTER and ACCEPT is displayed.
Exit the menu by pressing the i key 2-3 times.
