4
Code Programming
1.2. Code programming menu
ATTENTION: All code reprogramming must be carried out with the door
open!
Edit
from point to point, always within 10 seconds
1.2.1. Programming/changing the user code
Press the ON key
Enter the 4-digit user code
10 seconds
Turn the handle within 3 seconds. The lock is open
Press and hold the ON button until the green LED is
permanently lit and enter the new 4-digit user code within 5
seconds
5 seconds
The new user code is accepted
If the time period for entering the new code was exceeded in step 4, the
electronics switch off. The old code remains valid.
1.2.2. Changing the master code
Press and hold the ON button until the LED lights up
continuously
Press in the 6-digit master code
10 seconds
Turn the handle within 3 seconds. The lock is open
Enter the new 6-digit master code within 5 seconds
The new master code is accepted
