500.0037-A
2
Technical alterations reserved
1.4.
Operation elemnts
Input unit
Handle
1.5.
Set up
The safe is delivered without a battery inserted as standard, meaning it can be opened
and closed without entering a code.
If the battery is inserted and the safe is locked when delivered, please follow the 500.0021
instruction manual.
Installation
2.1.
Positioning against the building wall
When placing the safe, it must be noted that a minimum distance of 440 mm to the wall
must be maintained at the front in order to be able to open the door more than 90°. If you
also want to be able to use the full light width of the safe, a minimum distance of 340 mm
must also be maintained from the hinge side to the wall so that the door can be opened by
145°. If the door is to be opened 180°, a minimum distance of 410 mm must also be
maintained from the hinge side (see following figure).
Safe
Building wall
View from above with building wall
Front view (doors opened to 145°)
Internal
diameter
min. 340mm (145°)
min. 410mm (180°)
m
in
. 440mm
