LONG SCREW
2
MOUNTING
HOLDER
5
LOCK END
7
HOLDER SLOT
MOUNTING HOLDER
BOTTOM HOOKS
6
1
BRACE
HOLDER
TOP BRACKET
3
4
HANDLEBAR
CLAMP
SHORT SCREW
LONG SCREW
2
MOUNTING
HOLDER
5
LOCK END
7
HOLDER SLOT
MOUNTING HOLDER
BOTTOM HOOKS
6
1
BRACE
HOLDER
TOP BRACKET
3
4
HANDLEBAR
CLAMP
SHORT SCREW
LONG SCREW
2
MOUNTING
HOLDER
5
LOCK END
7
HOLDER SLOT
MOUNTING HOLDER
BOTTOM HOOKS
6
1
BRACE
HOLDER
TOP BRACKET
3
4
HANDLEBAR
CLAMP
SHORT SCREW
BICYCLE BASKET
with handle & mounting holder
- Basket easily removed for carrying
- Sized for grocery bag & many other uses
- Rust resistant durable finish
- Extended Mounting Holder allows clearance for shifters, brake
levers & cables
ASSEMBLY INSTRUCTIONS
- Loosely assemble
1
brace onto two vertical side wires of
2
holder with short screws. In most cases brace will be angled
upward toward Stem as shown.
- Center holder and hang
3
holder top brackets over handlebar.
(If clamping onto 7/8" portion of handlebar, insert rubber spacer
strips between holder and handlebar). Loosely assemble two
4
handlebar clamps with long screws.
- Attach basket to holder
- Hold basket so
5
lock end of handle is toward holder.
- Center basket with holder and insert lower basket frame wire over
bottom hooks of holder as shown.
- Raise handle upright and insert
5
lock end of handle through
7
slot at top of holder.
- Lay handle flat to lock.
- Adjust holder
1
brace vertically on holder side wires until basket
is in proper position.
- Remove basket from holder
- Raise basket handle upright.
- Pull away from holder and lift basket from bottom hooks of holder.
- Tighten all holder fittings securely.
Mfgr.No.3133GB (Black)
Made in U.S.A. by Wald
C
2009 Wald LLC
Rev.A 4/8/2009
WARNING
DO NOT
overload basket.
Overloading basket may cause difficulty
in steering and/or loss of bicycle control
which could result in injury.
!
Mfgr.No.3133GB (Black)
Made in U.S.A. by Wald
C
2009 Wald LLC
Rev.A 4/8/2009
WARNING
DO NOT
overload basket.
Overloading basket may cause difficulty
in steering and/or loss of bicycle control
which could result in injury.
!
- Loosely assemble
1
brace onto two vertical side wires of
2
holder with short screws. In most cases brace will be angled
upward toward Stem as shown.
- Center holder and hang
3
holder top brackets over handlebar.
(If clamping onto 7/8" portion of handlebar, insert rubber spacer
strips between holder and handlebar). Loosely assemble two
4
handlebar clamps with long screws.
- Attach basket to holder
- Hold basket so
5
lock end of handle is toward holder.
- Center basket with holder and insert lower basket frame wire over
bottom hooks of holder as shown.
- Raise handle upright and insert
5
lock end of handle through
7
slot at top of holder.
- Lay handle flat to lock.
- Adjust holder
1
brace vertically on holder side wires until basket
is in proper position.
- Remove basket from holder
- Raise basket handle upright.
- Pull away from holder and lift basket from bottom hooks of holder.
- Tighten all holder fittings securely.
ASSEMBLY INSTRUCTIONS
- Basket easily removed for carrying
- Sized for grocery bag & many other uses
- Rust resistant durable finish
- Extended Mounting Holder allows clearance for shifters, brake
levers & cables
BICYCLE BASKET
with handle & mounting holder
Mfgr.No.3133GB (Black)
Made in U.S.A. by Wald
C
2009 Wald LLC
Rev.A 4/8/2009
WARNING
DO NOT
overload basket.
Overloading basket may cause difficulty
in steering and/or loss of bicycle control
which could result in injury.
!
- Loosely assemble
1
brace onto two vertical side wires of
2
holder with short screws. In most cases brace will be angled
upward toward Stem as shown.
- Center holder and hang
3
holder top brackets over handlebar.
(If clamping onto 7/8" portion of handlebar, insert rubber spacer
strips between holder and handlebar). Loosely assemble two
4
handlebar clamps with long screws.
- Attach basket to holder
- Hold basket so
5
lock end of handle is toward holder.
- Center basket with holder and insert lower basket frame wire over
bottom hooks of holder as shown.
- Raise handle upright and insert
5
lock end of handle through
7
slot at top of holder.
- Lay handle flat to lock.
- Adjust holder
1
brace vertically on holder side wires until basket
is in proper position.
- Remove basket from holder
- Raise basket handle upright.
- Pull away from holder and lift basket from bottom hooks of holder.
- Tighten all holder fittings securely.
ASSEMBLY INSTRUCTIONS
- Basket easily removed for carrying
- Sized for grocery bag & many other uses
- Rust resistant durable finish
- Extended Mounting Holder allows clearance for shifters, brake
levers & cables
BICYCLE BASKET
with handle & mounting holder
A
WALD LLC MAYSVILLE, KY.
DRN
TITLE
APVD
SCALE
DATE
NO.
REVISIONS
ZONE
REV
DESCRIPTION
BY
DATE
CHAD
3133GB BASKET -
ASSEMBLY INSTRUCTIONS
1:1
9-15-03
C-68019
A
B
C
D
E
F
A
B
C
D
E
F
1
2
3
4
5
6
1
2
3
4
5
6
A
CHAD
4-8-09
REVISED WARNING NOTE - S.V.P.
