background image

 

 

Jægergårdsgade 152/05A 

DK-8000 Aarhus C 

DENMARK

WWW.WAHLBERG.DK

 

WWW.WAHLBERG.DK  ·  TELEPHONE  +45 86 18 14 20  ·  CELL PHONE  +45 40 52 20 88  ·  EMAIL: [email protected]  

THE PROJECTOR SHUTTER.  
DMX controlled.   

 

Contents of the projector shutter. 

1 motor box with transformer.  
1 small disc without motor clamp.  
1 big disc with motor clamp.  
1 small screwdriver. 
1 red washer 
 
 

Aluminum cabinet  

 
 
 
 

DMX output

DMX address setting. 

DMX ok lamp. 

DMX Input

 

Motor axe with screw 
for mounting the disc.  
Use the small 
screwdriver here.  

 
 
 
 
 
 

 
 
 
 

User manual // DMX  

1

 

Setting of DMX address.  

The DMX address is set on the 3 DMX wheels mounted inside the 

motor box. The red lamp flashes when addresses outside 1 to 512 are chosen.     

 

2

 

Connecting of DMX .

  The DMX signal is applied with a standard 5-pole XLR-plug.  

The red lamp shows a constant light when a good signal is found and flashes if the DMX signal 
is bad or missing. 

 

3

 

Mounting of the disk.

  The disk is mounted on the motor axle.  When the desired angle has 

been found, the disc can be tightened with the small black screw.  For this you may use the 
small screwdriver included with the projector shutter. 

 

4

 

Use of the projector shutter.  

When 220 volts and the DMX have been connected, the 

projector shutter is ready for use. By changing the percentage of the chosen DMX address, the 
motor axle can be made to turn forward and backward following the DMX percentage. The 
motor axle can turn from 0 to 180 degrees, 0% equalling 0 degrees and 100% being 180 
degrees.

 

Отзывы: