24
805.281.001
Date: March 22
rd
, 2017
On-site service
On-site service and maintenance CAN be provided by the Wahlberg Motion Design, giving
owners access to Wahlberg Motion Design’s expertise and product knowledge in a partnership
that will ensure the highest level of performance throughout the product’s lifetime. Please
contact Wahlberg Motion Design for details.
Life time of the rotator
It is Wahlberg policy to apply the strictest possible calibration procedures and use the best
quality materials available to ensure optimum performance and the longest possible component
lifetimes. The extent of wear and tear depends heavily on operating conditions and
environment, so it is impossible to specify precisely whether and to what extent the
performance will be affected. The expected lifetime of the rotator depends on the load, travel
length, mounted angle, as well as duty cycle.
Spare parts
Only parts ordered at or approved by Wahlberg should be used in the rotator to ensure product
function and stability. Contact Wahlberg to inquire about spare parts.
Power defect
If the rotator does not react when the power is connected check the following:
Check that the power plug is properly connected, both to the POWER IN plug on the
rotator and to the main power plug.
Check that the fuse is tightly screwed on in the fuse cap, also if it has just been changed.
Check that the fuse is intact. It can be replaced with a new 2.0A fuse.
‘Power in’
