15
805.281.001
Date: March 22
rd
, 2017
Attachment power and data link
Warning! Read “Safety Information” on page 2 before connecting AC mains power to the
attachment power inlet.
Warning! Socket outlets or external power switches used to supply the attachment with
power must be located near the rotator and easily accessible so that the attachment can easily
be disconnected from power.
Power voltage
Warning! Check that the voltage range specified on the rotators serial number label for
attachment power voltage matches the local AC mains power voltage before applying power
to the rotators attachment power inlet. Do not apply AC mains power to the rotators
attachment power inlet at any other voltage than that specified on the rotators serial number
label.
Attachment connection plug
The Rotator 281 requires a power and data input a Neutrik speakON NL4FX cable connector. The
cable for connecting the speakON plug on the rotator for the attachment power and data, must
meet the requirements listed under “Protection from electric shock” on page 2.
The attachment connection has four conductors; two for power and two for data or power.
Connecting the power cable
Refer to the section “AC power” on page 11 for installation of the power connection.
Connecting the data link
Refer to the section “Data link” on page 14 for installation of the data connection.
To install a Neutrik speakON NL4FX cable connector, follow the original Neutrik instructions
below:
