Voltage / resistance or temperature measurement
C
15
C. PROGRAMMING MODES
C.1
Voltage / resistance or temperature measurement
The choice of measurement or emission mode is made using the
F2
key
(mode
menu
)
.
Using the navigation keys
(
and
),
position the cursor in the
Measurement
field going down the menu.
Confirm your choice using the
VAL
key.
Note that the Measurement mode is the mode selected by default.
The function type selection (Thermocouple or resistive sensor type) is made using the
F1
key
(Configuration
menu
)
.
Using the navigation keys
(
and
),
position the cursor in the
Function
field.
Confirm the latter using the
VAL
key.
In the
MEASUREMENT CONFIGURATION
menu, position the cursor in the
TC Type
or
Probe
field using the
F1
key.
Enter the
TC Type
or
Probe
menu using the
F2
key
.
Choose the type of thermocouple (
K, T, J…
), using the navigation keys
(
and
) or the type of resistive sensor
(PT50, PT100, PT200…).
Press
VAL
to confirm.
Using the F1 key, define the
Unit
by positioning the cursor on it.
Enter the menu by pressing
F2
.
Using the navigation keys
(
and
)
, choose the unit.
Press
VAL
to confirm.
