WAGO WAGO-I/O-SYSTEM 750 XTR Series Скачать руководство пользователя страница 22

Страница: 22 / 272

22 System Description

WAGO-I/O-SYSTEM 750 XTR

750-352/040-000 FC ETHERNET G3 XTR

Manual

Version 1.3.0

In addition, the serial number is printed on the front on the cover cap of the

service interface, so that it can also be read when installed.

Pos: 19.11 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1

Pos: null /Serie 750 (WAGO-I/O-SYST EM)/Systembeschrei bung/Gerät und System/U pdate-M atri x @ 3\mod_1231757422359_21.docx @ 25928 @ 2 @ 1

3.3

Update

For products that can be updated, the side inscription has a prepared matrix in

which the current update data can be entered in columns.

Up to 2015, the matrix has rows to enter the “NO” work order number (or “BA” to

CW 13/2004), “DS” update date, “SW” software index (optional), “HW” hardware

index and “FWL” firmware loader index (optional).

Figure 3: Update Matrix up to 2015

From 2016, the matrix has rows to enter the “FA” production or work order

number and to enter the “PD” production date and “AZ” item number.

Figure 4: Update Matrix from 2016

Table 3: Legend for Figure “Update Matrix from 2016”

Description

Production order number, 10-digit

KW = calendar week

YY = year

FW = firmware index

HW = hardware index

FL = firmware loader index

For factory updates to a head station, the current production or work order

number is also printed on the cover cap of the service interface.

The original manufacturing information on the product housing remains

unchanged.

Pos: 19.13 /Serie 750 ( WAGO-I/O-SYST EM)/Systembeschrei bung/Gerät und System/Lagerung, Kommissi onierung und Tr ansport @ 3\mod_1225446600609_21.docx @ 24897 @ 2 @ 1

Содержание WAGO-I/O-SYSTEM 750 XTR Series

















































































































































































































































































Результаты поиска

Содержание WAGO-I/O-SYSTEM 750 XTR Series

Отзывы:

Похожие инструкции для WAGO-I/O-SYSTEM 750 XTR Series

Бренды по названию

Популярные бренды

WAGO WAGO-I/O-SYSTEM 750 XTR Series, Руководство пользователя

Результаты поиска

Содержание WAGO-I/O-SYSTEM 750 XTR Series

Отзывы:

Похожие инструкции для WAGO-I/O-SYSTEM 750 XTR Series

Бренды по названию

Популярные бренды