manualshive.com logo in svg

WAGO WAGO-I/O-SYSTEM 750 750-481/003-000, Руководство пользователя

Поделиться
Скачать
WAGO WAGO-I/O-SYSTEM 750 750-481/003-000 Скачать руководство пользователя страница 18

18 

Device Description 

WAGO-I/O-SYSTEM 750 

 

 

750-481/003-000 2AI RTD Ex i 

 

Manual 

 

1.1.0  

 

s: 26 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Anschlüsse/Leistungskontakte/Feldversorgung - Überschrift 3 @ 6\mod_1256294692864_21.doc @ 43664 @ 3 @ 1 

Po

 

3.2.2 

Power Contacts/Field Supply 

Po

 

s: 27.1 /Serie 750 (WAGO-I/O-SYSTEM)/Wichtige Erläuterungen/Sicherheitshinweise/Vorsicht/Vorsicht: Verletzungsgefahr durch scharfkantige Messerkontakte! @ 6\mod_1256193279401_21.doc @ 43414 @  @ 1 

 

 

 

Risk of injury due to sharp-edged male contacts! 

The male contacts are sharp-edged. Handle the module carefully to prevent injury.

 

s: 27.2 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Anschlüsse/Leistungskontakte 2 LK (Messer/Feder) @ 7\mod

Po

 

_1266317883167_21.doc @ 50688 @  @ 1 

The I/O module 750-481/003-000 has 2 self-cleaning power jumper contacts that 
supply and transmit power for the field side. The contacts on the left side of the 
I/O module are designed as male contacts and the contacts on the right side as 
spring contacts. 

Table 4: Power jumper contacts 

Connection

Type 

Number 

Function 

1 Blade 

contact 

2 

Infeed of the field 

supply voltage 

(U

V

 and 0 V) 

1

2

1

2

 

Figure 4: Power 
jumper contacts 

2 Spring 

contact 

2 

Forwarding of the 

field supply voltage

(U

V

 and 0 V) 

 

Po

 

s: 27.3 /Serie 750 (WAGO-I/O-SYSTEM)/Wichtige Erläuterungen/Sicherheitshinweise/Achtung/Achtung: Maximaler Strom Ex i Einspeisung 750-06xx 0,5 A / 1,0 A @ 7\mod_1274358256668_21.doc @ 56898 @  @ 1 

 

 

 

Do not exceed maximum current via power contacts! 

The maximum current available from the 750-625 Ex-i Supply Module is 
500 mA.  
The maximum current available from the 750-606 or 750-625/000-001 Ex-i 
Supply Module is 1000 mA.  
Greater currents can damage the power contacts.  
When configuring the system, ensure that this current is not exceeded. If 
exceeded, an additional potential feed module must be used. 

 

 

s: 27.4 /Serie 750 (WAGO-I/O-SYSTEM)/Wichtige Erläuterungen/Sicherheitshinweise/Hinweis/Hinweis: Potentialeinspeiseklemme für Erde einsetzen! @ 3\mod_1226499037468_21.doc @ 25023 @  @ 1 

Po

 

 

 

 

 

Use potential feed module for Ground (earth)! 

The I/O module has no power contacts for PE intake and transfer. Use a potential 
feed module when a PE feed is needed for the subsequent I/O modules. 

 

s: 28 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @  @ 1 

Po

 

Содержание WAGO-I/O-SYSTEM 750 750-481/003-000



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды