System Update on the WAGO-I/O-IPC via CF Card • 15
"Setupmenu.sh" Update Tool
WAGO-I/O-IPC
p) PARTITIONING
Create partitions, install Linux Loader syslinux
c) CONFIGURATION
Configure IP address and root file system
i) INSTAL RUNTIME
Install root file system
q) QUIT
Your Choice: _
4.2.2.1 PARTITIONING
When performing a completely new installation, the file system must be
repartitioned first and the operating system installed under => p. To do so,
type the appropriate letter in the command line and press the <ENTER> key.
To cofirm valid the following request,
Do You want to update current Kernel ? [n]: y
press =>
y
and the <ENTER> key and both the system update and the Linux
kernel installation will start automatically.
After successful completion of this installation step, the selection menu is
displayed again for further installation steps.
4.2.2.2 INSTALL
RUNTIME
As the next step in the installation procedure, the update of the CoDeSys
runtime system is performed with =>
i)
.
Now you are asked to confirm the request by typing
y
and the <ENTER> key.
Once the CoDeSys runtime system is successfully installed, the selection
menu is displayed again for further installation steps.
4.2.2.3 CONFIGURATION
This menu item allows you to configure the network parameters of the
WAGO-I/O-IPC. It is identical to the CONFIGURATION item from the main
menu, which is described in details in the following section 4.2.3.
4.2.2.4 QUIT
Select this item to leave the setup program and return to the Linux console.