WAGO-SPEEDWAY 767
Parameterizing
61
767-5803/000-800 8DIO 24V DC 0.5A IF (8xM12)
Manual
Version 1.1.0
7.2.3
"DI Module" Mode
Table 34: Overview of adjustable parameters for the digital inputs
Parameter
Description
Function mode
Mode display
Designation
Electronic marking field (max. 40 characters)
Input value
The input state is indicated in this box.
When simulation is switched on, the field becomes a checkbox.
Activate this checkbox to simulate input state "1" independently from the
input in the process image.
Signal inverting
You can invert the currently pending input signal here.
Checkbox unselected*:
Input signal is reproduced in the process image in the same manner as the
input
Checkbox selected:
Input signal is reproduced in the process image in an inverted manner
Filter time
Set the input filter for the measured signals here. You have the following
options:
none
0.1 ms
0.5 ms
3 ms*
15 ms
20 ms
Simulation input value Activate this checkbox to switch input simulation on. The field for the
input value then becomes a checkbox for the simulation value.
* Default status
7.2.4
"DIO Module" Mode
Combined operation of digital inputs and outputs. For an explanation of the
adjustable parameters for the digital outputs, see section "DO Module" and for the
digital inputs section "DI Module".
