WAGO LONWORKS 750-319 Скачать руководство пользователя страница 114

Страница: 114 / 145

114 •

I/O

Modules

ORKS

5.2 TOPLON

supported I/O modules

For the configuration of LON applications, there is already a large number of
bus modules supported by the software

TOPLON

IF and

TOPLON

PRIO.

The types of modules which you can employ in conjunction with the WAGO

TOPLON

software, a part of these modules are listed in the following over-

view.

Symbol

Meaning

supported

not supported

not relevant, because I/O module has no data

Note!

The bus module variations with the order No. 750-XXX/000-200 have the
Numerical format for Siemens function blocks. This Numerical format is

not

supported by the WAGO

TOPLON

software!

You are, of course, free to program your own LON applications in Neuron-C,
which permits you to use and implement all other bus modules.

Digital Inputs

Item-

supported by

No:
750-

notation

TOPLON®
IF

TOPLON®
PRIO

400

2 Channel Digital Input (filter 3.0 ms, 24 V DC)

401

2 Channel Digital Input (filter 0.2 ms, 24 V DC)

402

4 Channel Digital Input (filter 3.0 ms, 24 V DC)

403

4 Channel Digital Input (filter 0.2 ms, 24 V DC)

405

2 Channel Digital Input (230 V AC)

406

2 Channel Digital Input (120 V AC)

408

4 Channel Digital Input (filter 3.0 ms, 24 V DC)

409

4 Channel Digital Input (filter 0.2 ms, 24 V DC)

410

2 Channel Digital Input (filter 3.0 ms, 24 V DC)

411

2 Channel Digital Input (filter 0.2 ms, 24 V DC)

412

2 Channel Digital Input (filter 3.0 ms, 48 V DC)

414

4 Channel Digital Input (filter 0.2 ms, 5 V DC)

Содержание LONWORKS 750-319


















































































































































Результаты поиска

Содержание LONWORKS 750-319

Отзывы:

WAGO LONWORKS 750-319, Руководство пользователя, Страница: 114 / 145

Результаты поиска

Содержание LONWORKS 750-319

Отзывы: