750-622 [Binary Spacer Module]
•
7
View
WAGO-I/O-SYSTEM 750
I/O Modules
2 I/O Modules
2.1 System Modules
2.1.1 750-622 [Binary Spacer Module]
Binary Spacer Module, with power supply
2.1.1.1 View
+
+
-
-
13
14
C
D
B
A
750-622
0V
Power jumper contacts
Data width
Supply via power
jumper contacts
24V
Data contacts
Operating mode
Input/
output
Fig. 2.1.1-1: Binary Spacer Module 750-622
g062200e
2.1.1.2 Description
The binary spacer module reserves digital addresses in the WAGO buscoupler.
The number of inputs or outputs can be selected by two DIP switches. 2, 4, 6
or 8 bits are possible (equivalent to 1, 2, 3 or 4 two-channel modules). A third
DIP Switch selects inputs or outputs.
The configuration is indicated by means of 3 LEDs, which are lit, even if there
is no voltage applied.
The binary spacer module also works as a 24 V supply module. Power must be
connected to supply the modules following the binary spacer.
Warning
The maximum current of the binary spacer module is 10 A. When configuring
the system it is important not to exceed the maximum/sum current. However,
if such a case should occur, another supply module must be added.
The binary spacer module 750-622 can be used with all couplers/controllers of
the WAGO-I/O-SYSTEM 750.