WAGO Compact Controller 100 страница 75 Скачать руководство пользователя

Страница: 75 / 198

WAGO I/O System Compact

Mounting 75

751-9301 Compact Controller 100

Manual

Version 1.1.0, valid from FW Version 03.08.07(20)

Do not pull on the cables when using a screwdriver or operating tool!

When using a screwdriver or operating tool to remove the female connector

not

pull on the cables!

Grip underneath the protruding rim of the female connector to pull it out.

6.4.2.3 Plugging in the Female Connector

Make sure that the

picoMAX

Female Connectors are mated properly!

Make sure that the female connector is properly mated!

Proceed as follows to plug the female connector into the corresponding male

header:

Insert the female connector into the corresponding male header.

Ensure the correct alignment!

Make sure that the female connector is inserted with the correct alignment:

The orange push-buttons must point inward from the device.

Push in the female connector until the female connector snaps into position

with an audible click.

When plugging in with wiring: Check that the female connector is seated

securely by gently pulling on the wires.

Содержание Compact Controller 100







































































































































































































Результаты поиска

Содержание Compact Controller 100

Отзывы:

Похожие инструкции для Compact Controller 100

Бренды по названию

Популярные бренды

WAGO Compact Controller 100, Руководство пользователя

Результаты поиска

Содержание Compact Controller 100

Отзывы:

Похожие инструкции для Compact Controller 100

Бренды по названию

Популярные бренды