WAGO 852-1102 Скачать руководство пользователя страница 31

Страница: 31 / 36

WAGO ETHERNET Accessories 852

Mounting 31

852-1102 Industrial Switch

Manual

Version 1.2.0

Mounting

5.1

Installation site

The location selected to install the industrial switch may greatly affect its

performance. When selecting a site, we recommend considering the following

rules:

•

Install the industrial switch at an appropriate place. See section “Device

Description” > … > “Technical Data” for the acceptable temperature and

humidity operating ranges.

Make sure that the heat output from the industrial switch and ventilation around it

is adequate. Do not place any heavy objects on the industrial switch.

Personal Injury Caused by Hot Surface!

Indicates a low-risk, potentially hazardous situation which, if not avoided, may

result in minor or moderate injury.

5.2

Installation on a Carrier Rail

The carrier rail must optimally support the EMC measures integrated into the

system and the shielding of the internal data bus connections.

Place the industrial switch onto the carrier rail from the top and snap it into

position.

5.3

Removal from DIN-Rail

To remove the industrial switch from the DIN rail, insert a suitable tool into the

metal tab under the switch and deflect the metal tab downward.

You can then release the switch down from the DIN rail and remove it upwards.

Содержание 852-1102





































Результаты поиска

Содержание 852-1102

Отзывы:

Бренды по названию

Популярные бренды

WAGO 852-1102, Руководство пользователя

Результаты поиска

Содержание 852-1102

Отзывы:

Бренды по названию

Популярные бренды