WAGO ETHERNET Accessories 852
Device Description 23
852-1102 Industrial Switch
Manual
Version 1.2.0
4.2.3
Network Connections
The industrial switch uses ports with copper connectors that can be used with
ETHERNET and/or Fast ETHERNET protocols.
Figure 5: Network Connections
Table 6: Legend for Figure “Network Connections”
No. Descrip-
tion
Meaning
Details see Section
1
-
Connection 8 x RJ-45 (10/100/1000BASE-T
ports)
“Device Description” > …
“10/100/1000BASE-T ports“
4.2.3.1 10/100/1000Base-T
The 10/100/1000Base-T ports support network speeds of 10 Mbit/s, 100 Mbit/s
and 1000 Mbit/s and can be operated in half and full-duplex transmission modes.
These ports also provide automatic crossover detection (Auto-MDI/MDI-X), with
plug&play capabilities. Simply plug the network cables into the ports; they then
adapt to the end node devices. We recommend the following cable for the RJ-45
ports:
•
100 m – Cat 5e or higher
