WAGO 787-1216, Руководство пользователя

Страница: 24 / 42

0787-1216 Installation and Removal
24 Product manual | Version: 1.0.0
Compact Power Supply
4 Installation and Removal
!
NOTICE
Avoid electrostatic discharge!
The products are equipped with electronic components that may be destroyed by electro-
static discharge when touched. Please observe the safety precautions against electro-
static discharge per DIN EN 61340-5-1/-3. When handling the products, please ensure
that environmental elements (personnel, work space and packaging) are properly
grounded.
4.1 Mounting Positions
For proper cooling, mount the product vertically (ventilation slots at the top and bottom,
front facing forward).
When mounting with the front up or down, the following values must not be exceeded:
Table 25: Values for Mounting Position – Mounting with Front Panel at Top or Bottom
Product Output Power Surrounding air temperature
787-1216 50 % 55 °C
The product can be mounted on a DIN-35 rail or with screws.
Note
Observe minimum clearances!
To avoid malfunctions, maintain the required minimum clearances (see
8
Technical
data [
}
15] )!
The product can be mounted on a DIN-35 rail or with screws.
4.2 DIN-35 Rail
The DIN rail is located in the center of the vertical axis (see
8
Technical data [
}
15] ).
Figure 14: Position of the DIN Rail
The distances from the central axis of the DIN rail to the top and bottom are 45 mm.