58
Parameterizing
WAGO-SPEEDWAY 767
767-5401 4DIO 24V DC 0.2A HS (4xM12)
Manual
Version 1.1.0
7.3.2
Parameters in the DI Mode
Table 30: Overview of adjustable parameters for the digital inputs
Parameter
Description
Function mode
Mode display
Designation
Electronic marking field (max. 40 characters)
Input value
The input state is indicated in this box.
When simulation is switched on, the field becomes a checkbox.
Activate this checkbox to simulate input state "1" independently from the
input in the process image.
Signal inverting
You can invert the currently pending input signal here.
Checkbox unselected*:
Input signal is reproduced in the process image in the same manner as the
input
Checkbox selected:
Input signal is reproduced in the process image in an inverted manner
Filter time
Set the filter for the input signals here. You have the following options:
filter off
10 µs
25 µs
50 µs
100 µs
200 µs
1 ms
3 ms
Simulation input value Activate this checkbox to switch input simulation on. The field for the
input value then becomes a checkbox for the simulation value.
7.3.3
Parameters in the DIO Mode
Combined operation of digital inputs and outputs. For an explanation of the
adjustable parameters for the digital outputs, see Section "Parameters in the DO
Mode" and for the digital inputs see Section "Parameters in the DI Mode".