72
Parameterizing
WAGO-SPEEDWAY 767
767-5201 TTL Incremental/SSI Encoder
Manual
Version 1.1.0
7.5.1
Connection Mode "Digital Output"
Table 43: Overview of adjustable parameters for the digital outputs
Parameter
Description:
Function mode
Mode display
Designation
Enter a designation for the connection. Max. 40 characters can be
entered.
Output value
The output status is indicated in this field.
Process image value
This field indicates the value of the output process image for this output.
When manual operation is selected, the field becomes a checkbox.
Activate the checkbox to output the status "1" on the output independent
of the control unit.
Signal inverting
Select here whether the current process value should be released as an
inverted output value.
Checkbox unselected:*
Output signal is output as shown in the process image.
Checkbox selected:
Output signal is output as an inversion of that shown in the process
image.
Substitute strategy
This is used, e.g. to output the substitute value or the last output value in
the event of a fieldbus interruption. You have the following options:
- Set to substitute value
*
- Hold last value**
Substitute value
Enter the process value that is output in case of error. In the case of an
error (fieldbus interruption), this value is used with the "Switch to
Substitute Value" strategy.
Checkbox unselected:
0*
Checkbox selected:
1
Manual operation
Activate this checkbox to define the output value independently from the
control unit. When manual operation is selected, the field for the process
image value becomes a checkbox for the manual operation value.
Diagnostic Simulation
Activate the checkbox to switch diagnostic simulation on. When the
simulation is switched on, the display fields for the diagnoses become
checkboxes.
