WAGO 765-4102/0100-0000 Скачать руководство пользователя

Страница: 85 / 146

765-4102/0100-0000

Commissioning

Product manual | Version: 2.1.0

8PORT IOL-B FLD PN DC 24V 2.0A

Note

Create backup before update

When you update your product’s firmware, the state of your product before the update, in-
cluding the firmware used up to that point, can no longer be reconstructed unless a
firmware and configuration data backup exists.

Changes to settings require operator or admin rights. If you do not have these, the

Set-

tings

tab is grayed out and cannot be edited.

To update the firmware, you need a firmware container file:

FWUPDATE.ZIP

. You can get

this from the WAGO website: www.wago.com.

Proceed as follows to update the firmware:

1. In the left-hand column of WAGO Webserver I/O Field, click the

Settings

menu item

The

Device configuration

tab appears

2. Select the

Firmware upgrade

tab

3. Click the

[Select file]

button

A file selection dialog opens.

4. Select the firmware container file

FWUPDATE.ZIP

from this dialog

The name of the selected firmware container file appears in the

File

field.

5. Click the

[Upgrade]

button

The firmware update is performed. After that, the port must be configured anew.

The firmware update procedure is as follows:

1. The firmware from the

FWUPDATE.ZIP

firmware container file is stored in the mod-

ule’s flash memory

2. An internal reset is triggered

3. Then the device maintenance firmware starts; this edits the firmware container file

and installs the new firmware, including the module’s configuration files

4. You are notified when the installation procedure finishes

5. The module then resets again

6. The new firmware that has just been loaded starts

10.2.2.4.6 Resetsetting the Module to the Factory Settings

In many cases, it can be helpful to reset the product to the factory settings. This can be
done for various selectable classes of settings with the

Settings

menu item on the

Fac-

tory reset

tab.

Содержание 765-4102/0100-0000



















































































































































Результаты поиска

Содержание 765-4102/0100-0000

Отзывы:

Похожие инструкции для 765-4102/0100-0000

Бренды по названию

Популярные бренды

WAGO 765-4102/0100-0000, Руководство пользователя

Результаты поиска

Содержание 765-4102/0100-0000

Отзывы:

Похожие инструкции для 765-4102/0100-0000

Бренды по названию

Популярные бренды