765-4102/0100-0000
Commissioning
Product manual | Version: 2.1.0
69
8PORT IOL-B FLD PN DC 24V 2.0A
• The sum of all currents (for supply cables 1L and 2L)
10.2.2.3 Opening the Product Information via WAGO Webserver I/O Field
10.2.2.3.1 Displaying Port Information
For each of the module’s IO-Link ports (port X01, port X02 etc.), individual port informa-
tion can be found on the
Information
,
Status
,
Configuration, IOL
and
Process data
tabs.
The
Configuration
tab also offers the option of making port settings.
You can access the port information as follows:
1. From the main menu of the Webserver (left), select the menu item which you want to
view information about.
ð
The
Information
tab opens.
2. Click the desired tab.
ð
You can now access information about the desired port.
For each port, you can select from the following five tabs:
Table 41: Tabs for Port Information and Settings (IO-Link Ports X01, X02 etc.)
Tab
Description
Information
Displays the current measured values for temperature,
voltage and current, as well as the port state, individu-
ally for each of pin 1, pin 2 and pin 4. If an IO-Link de-
vice is connected to the port via pin 4, its product data
is also shown. This tab is pre-configured.
Status
Displays status information for the entire port
Configuration
For displaying and setting port parameters, such as
the operating time or cycle time of the port
IOL
Read/write access to data of one of the IO-Link de-
vices connected to the port
Process data
Displays the process data
