WAGO-TO-PASS® 761
Parameterizing
45
761-314 TO-PASS® Mobile, 4 AI
Manual
Version 2.0.0
Pos : 33 /All e Seri en (Allgemei ne Module)/Ü berschrif ten f ür alle Serien/I nbetri ebnehmen - Konfigurier en - Parametri eren/Par ametri eren - Ü bers chrift 1 @ 3\ mod_1223554593484_21.doc x @ 23717 @ 1 @ 1
7
Parameterizing
Pos : 34.1 /Serie 759 (WAGO-Sof t war e)/TO- PASS Konfigurationss oft ware/Parametri erung/Parametrier ung Allgemei ne Ei nst ellungen @ 3\ mod_1223554662781_21. doc x @ 23720 @ 2 @ 1
7.1
General Settings
Select the menu item
File
>
Settings
for making general settings, such as type of
connection, interface or language for the
TO-PASS
®
operating interface.
Figure 19: General settings
Table 23: General settings
Connection
RS-232 / GSM /
Analog / ISDN
Select the type of connection for communicating with the
TO-PASS
®
telecontrol module:
RS-232
Direct connection via RS-232 cable
GSM
Dial-up using GSM modem on the PC
Analog
Dial-up using analog modem on the PC
ISDN
Dial-up using ISDN modem on the PC
Modem init.
If the connection is to be established via a modem and this
modem requires initialization, enter the initialization string in
this field.
Area code
If this connection is to be established via a modem at an
analog or ISDN PBX and a trunk code is required for this,
enter the trunk code in this field.
