52
Quickstart Description
WAGO-I/O-SYSTEM 750
750-880, -881, -882 ETHERNET Programmable Fieldbus
Quickstart Reference
Version 1.0.0
3.3.7
Loading and Starting the Program
1.
To load the program into your PLC, click on the
Login
menu item in the
WAGO-I/O-
PRO
dialog under the
Online
menu.
2.
Then start program execution in the PLC via the menu item
Online > Start
.
3.
Now select the menu item
Online > Create bootproject
to create a boot
project.
With this boot project, the program is automatically loaded when restarting
the PLC.
4.
To automatically start the PLC after restarting, move the Operating mode
switch behind the cover cap of the service interface to the top position
(RUN) on the PLC.
Figure 47: Operating mode switch at the top position (RUN)
3.3.8
Visualization
In this sample project, a visualization is created that displays the logical state of
two digital inputs (DI1 and DI2) and two digital outputs (DO1 and DO2). In
addition, it is possible to change the state of a digital output (here DO2) via a
button in the visualization.
After you have loaded, and started the program created with the WAGO-I/O-
PRO
software, you can then display and operate the process via the visualization in two
ways:
•
You can control the process from the visualization in the WAGO-I/O-
PRO
software directly.
•
You can also call up the process in an Internet browser as a
Web visualization and control the process via this visualization.
The function and presentation are identical for both visualization options.
