WAGO-I/O-SYSTEM 750
Fieldbus Communication 275
750-880, 750-880/025-000 ETHERNET Programmable Fieldbus Controller
Manual
Version 1.0.1
Instance 1
Table 213: TCP/IP interface (F5
hex
) – Instance 1
Attribute ID Access NV Name
Data type Description
Default
value
1 Get
V
Status
DWORD
Interface
state
-
2 Get
V
Configuration
Capability
DWORD Interface flags for possible
kinds of configuration
0x00000017
3 Set
NV
Configuration
Control
DWORD Specifies, how the device gets
is TCP/IP configuration after
the first Power On
0x00000011
Physical Link
Object
STRUCT
of
Path size
UINT
Number of 16 Bit words in
the following path
0x0002
4 Get
V
Path Padded
EPATH
Logical path, which points to
the physical Link object
0x20 0xF6
0x24 0x03
(equates to
the Ethernet
Link Object)
Interface
Configuration
STRUCT
of
-
IP Address
UDINT
IP address
0
Network
Mask
UDINT
Net work mask
0
Gateway
Address
UDINT
IP address of default gateway 0
Name Server UDINT
IP address of the primary
name of the server
0
Name Server
2
UDINT
IP address of the secondary
name of the server
0
5 Set
NV
Domain
Name
STRING Default
domain
name
“”
6
Set
NV Host Name
STRING Device name
“”
Common Services
Table 214: TCP/IP interface (F5
hex
) – Common service
Service available
Service code
Class Instance
Service name
Description
01
hex
Yes
Yes
Get_Attribute_All
Supplies contents of all attributes
0E
hex
Yes
Yes
Get_Attribute_Single Supplies contents of the appropriate attribute
10
hex
No
Yes
Set_Attribute_Single Modifies an attribute value
12.3.5.11 Ethernet Link (F6
hex
)
The "Ethernet Link Object" contains link-specific counter and status information
for an Ethernet 802.3 communications interface. Each device must support exactly
one instance of the Ethernet Link Object for each Ethernet IEEE 802.3
communications interface on the module. An Ethernet link object instance for an
internal interface can also be used for the devices, e.g. an internal port with an
integrated switch.
