manualshive.com logo in svg

WAGO 750-880, Руководство пользователя

Поделиться
Скачать
WAGO 750-880 Скачать руководство пользователя страница 102

102  Function Description 

WAGO-I/O-SYSTEM 750 

 

 

750-880, 750-880/025-000 ETHERNET Programmable Fieldbus Controller 

 

Manual 

 

Version 1.0.1  

Switch on the supply for the fieldbus controller. 

In normal operation, the fieldbus controller starts. 

The data from the /copy/ directory on the memory card is copied into the 
appropriate directories on the internal file system.  

Meanwhile, the SD-LED blinks yellow/orange. 

The data is then loaded automatically and the settings automatically become 
active.  

Identical data that is already present in the internal file system is not copied. The 
application runs with the copied data. Device settings and other files are saved on 
the fieldbus controller and are executed.   

Table 37: Possible errors on system start 

Possible error 

Procedure 

Error message 

Solution 

No /copy/ and 
/settings/ directories on 
the memory card 

System start of the 
fieldbus controller is 
running as if no 
memory card were 
present. 

No message. 

If memory card use is 
desired, map the 
directory structure of 
the internal drive under 
/copy/ on the memory 
card on the PC. 
Then restart the 
fieldbus controller. 

Manual interrupt 

If the /copy/ directory 
has not yet been copied 
in full, then the copy 
process is stopped on 
manual interrupt. The 
data is incomplete. 

Blink code of the I/O 
LED 
for 30 seconds (error 
code 14, error 
argument 2) or until the 
error is eliminated. 

Restart system. 

Internal file system is 
full 

As much data is copied 
until the file system is 
full. 
The copy function is 
cancelled. The data is 
incomplete. 

Blink code of the I/O 
LED 
(error code 14, error 
argument 3) until the 
error is eliminated. 

Check internal file 
system and /copy/ 
directory on the 
memory card and 
delete data if necessary 
(e.g. via FTP, 
formatting internal 
drive or cleaning the 
memory card on the 
PC). 

General internal error 

The copy function is 
cancelled. The data is 
incomplete. 

Blink code of the I/O 
LED 
(error code 14, error 
argument 7). 

If necessary, restart 
function and device. 

 

 

 

 

The file size may not be larger than the size of the internal drive! 

Note that the amount of data in the /copy/ directory may not exceed the total size 
of the internal drive. 

 

Содержание 750-880































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды