manualshive.com logo in svg

WAGO 750-830, Руководство пользователя

Поделиться
Скачать
WAGO 750-830 Скачать руководство пользователя страница 295

 

 

List of all BACnet Properties in Native Operation    •  295 

  

Modification_Date  

WAGO-I/O-SYSTEM 750 

 

BACnet/IP Controller 

6.48 Modification_Date 

Data Type

 BACnetDateTime 

Objects  

File 

Description

 

This property, of type BACnetDateTime, indicates the last 
time this object was modified. A File object shall be consid-
ered modified when it is created or written to. 

 

6.49 Notification_Class 

Data Type 

Unsigned 

Objects 

 

Binary Input, Binary Output, Analog Input, Analog Output 

Description 

This property, of type Unsigned, shall specify the notifica-
tion class to be used when handling and generating event 
notifications for this object. The Notification_Class property 
implicitly refers to a Notification Class object that has a No-
tification_Class property with the same value.  

 

6.50 Notify_Type 

Data Type 

BACnetNotifyType 

Objects 

 

Binary Input, Binary Output, Analog Input, Analog Output 

Description

 

This property, of type BACnetNotifyType, shall convey 
whether the notifications generated by the object should be 
Events or Alarms.  

 

 

6.51 Number_Of_APDU_Retries 

Data Type 

Unsigned 

Objects

  

Device 

Description 

The Number_Of_APDU_Retries property, of type Un-
signed, shall indicate the maximum number of times that an 
APDU shall be retransmitted. The default value for this 
property shall be 3. If this device does not perform retries, 
then this property is set to zero. If the value of this property 
is greater than zero, a non-zero value is placed in the device 
object APDU_Timeout property.  

Содержание 750-830









































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды