WAGO 750-8212/040-010 Скачать руководство пользователя страница 27

Страница: 27 / 434

WAGO-I/O-SYSTEM 750 XTR

Device Description 27

750-8212/040-010 PFC200 G2 2ETH M12 RS XTR

Manual

Version 1.0.0, valid from FW version 03.01.07(13)

Device Description

The controller 750-8212/040-010 (PFC200 G2 2ETH M12 RS XTR) is an

automation device that can perform control tasks of a PLC. It is suitable for

mounting on a DIN rail and stands out on account of its various interfaces.

This controller is specifically designed for rail and marine applications.

You can connect all available I/O modules of the WAGO-I/O-SYSTEM 750 XTR

to the controller, enabling it to internally process analog and digital signals from

the automation environment, or to supply these signals to other devices via one

of the available interfaces.

Automation tasks can be executed in all IEC 61131-3-compatible languages with

the WAGO

-I/O-PRO

COCKPIT

programming system, depending on the

runtime system set (CODESYS 2 or

RUNTIME

The implementation of the task processing in the runtime system for Linux

has

been optimized with real-time extensions in order to provide maximum

performance for automation tasks. Web visualization is also provided as

visualization in addition to the development environment.

For IEC-61131-3 programming in CODESYS applications, the controller provides

16 MB of program memory (flash) and 64 MB of data memory (RAM) under

CODESYS 2 and 64 MB of program and data memory (dynamically distributed)

under

RUNTIME

as well as 128 kB of retentive memory (retain and flag

variables) in an integrated NVRAM.

</dg_

Two ETHERNET interfaces designed as M12 connection and an integrated,

interruptible switch enable wiring for:

•

In line topology with a common MAC address and IP address for both

interfaces.

•

Two separate networks with a common MAC address and an IP address

for each interface.

Both of these interfaces support:

•

10BASE-T / 100BASE-TX

•

Full/Half duplex

•

Autonegotiation

•

Auto-MDI(X) (automatic uplink and crossover switching)

The following fieldbus circuits are implemented for exchange of process data:

•

Modbus

TCP Master/Slave

•

Modbus

UDP Master/Slave

Содержание 750-8212/040-010



















































































































































































































































































































































































































































Результаты поиска

Содержание 750-8212/040-010

Отзывы:

Бренды по названию

Популярные бренды

WAGO 750-8212/040-010, Руководство пользователя

Результаты поиска

Содержание 750-8212/040-010

Отзывы:

Бренды по названию

Популярные бренды