WAGO-I/O-SYSTEM 750
Run-time System CODESYS 2.3 231
750-8207 PFC200 CS 2ETH RS 3G
Manual
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
8.2.4
Editing the Program Function Block
To edit the PLC_PRG program function block, go to the “Function block” tab and
double-click on the PLC_PRG program module.
Figure 65: Program Function Block
The following example illustrates the editing of the program function block. To do
this, an input is assigned to an output:
1.
Press
[F2]
to open the Input assistant, or right click and select “Input
assistant” from the contextual menu.
Figure 66: Input Assistant for Selecting Variables
2.
Under “Global variables” select the previously declared variable “Output_1”
and click
[OK]
to add it.
3.
Enter the allocation “=” behind the variable name.
