WAGO 750-496 Скачать руководство пользователя

Страница: 59 / 92

WAGO-I/O-SYSTEM 750

Commissioning 59

750-496 8AI 0/4-20mA S.E.

Manual

Version

1.2.2

Table 30:

Calibration

Menu Item

Option

Description

Selection

of the

calibration

method

Activate factory configuration

Activate

factory

configurati



Factory calibration is activated and user calibration is

deactivated.



Factory calibration is deactivated and user calibration is

activated.
Gain

The Gain value is specified by the manufacturer.

Offset The Offset value is specified by the manufacturer.

Activate user calibration

Activate

user

calibration



User calibration is activated and factory calibration is deactivated.

You determine the gain and offset value yourself.



User calibration is deactivated and factory calibration is

activated.

Gain

Enter the Gain value for the user calibration.

The Gain value changes the gain factor of the A/D raw value.

The value entered must fall within the value range 0 … 65535.

The resolution is 1/8192.

Offset

Enter the Offset value for the user calibration.

The Offset value moves the zero point of the A/D raw value

(offset on the y axis).

The value entered must fall within the value range

−32768 … 32767.

A/D raw value

Raw value of the analog/digital converter. This is a 14-bit value.

If the channel is deactivated, “N/A” (not available) is displayed.

The A/D raw value is read cyclically from the I/O module.

Current [mA]

Display of the calibrated input current in milliamps (mA).

This is a 32-bit value.

If the channel is deactivated, “N/A” (not available) is displayed.

The input current value is read cyclically from the I/O module.

Factory setting

Содержание 750-496





























































































Результаты поиска

Содержание 750-496

Отзывы:

Похожие инструкции для 750-496

Бренды по названию

Популярные бренды

WAGO 750-496, Руководство пользователя

Результаты поиска

Содержание 750-496

Отзывы:

Похожие инструкции для 750-496

Бренды по названию

Популярные бренды