WAGO 750-461 Скачать руководство пользователя страница 53

Страница: 53 / 64

WAGO-I/O-SYSTEM 750

Use in Hazardous Environments 53

750-461 2AI Pt100/RTD

Manual

Version 1.4.1

Pos: 36.21.4 /Alle Serien (Allgemeine Module)/Überschriften/Ebene 3/Besondere Hinweise hinsichtlich ANSI/ISA Ex - Überschrift 3 @ 29\mod_1491558494822_21.docx @ 415468 @ 3 @ 1

7.2.2

Special Notes Regarding ANSI/ISA Ex

Pos: 36.21.5 /Serie 750 (WAGO-I/O-SYSTEM)/Einsatz in Ex-Bereichen/ANSI/ISA gemäß UL File E198726_2017 @ 29\mod_1491557259544_21.docx @ 415451 @ @ 1

For ANSI/ISA Ex acc. to UL File E198726, the following additional requirements

apply:

•

Use in Class I, Division 2, Group A, B, C, D or non-hazardous areas only

•

ETHERNET connections are used exclusively for connecting to computer

networks (LANs) and may not be connected to telephone networks or

telecommunication cables

•

WARNING

– The radio receiver module 750-642 may only be used to

connect to external antenna 758-910!

•

WARNING

– Product components with fuses must not be fitted into circuits

subject to overloads!

These include, e.g., motor circuits.

•

WARNING

– When installing I/O module 750-538, “Control Drawing No.

750538” in the manual must be strictly observed!

Pos: 36.22 /Dokumentation allgemein/Gliederungselemente/---Leerabsatz-(2Z)--- @ 3\mod_1224662755687_0.docx @ 24460 @ @ 1

Pos: 36.23 /Dokumentation allgemein/Gliederungselemente/---Leerabsatz-(2Z)--- @ 3\mod_1224662755687_0.docx @ 24460 @ @ 1

Pos: 36.24 /Dokumentation allgemein/Gliederungselemente/---Leerabsatz-(2Z)--- @ 3\mod_1224662755687_0.docx @ 24460 @ @ 1

Pos: 36.25 /Serie 750 (WAGO-I/O-SYSTEM)/Einsatz in Ex-Bereichen/Information: Zertifizierungsnachweis @ 7\mod_1274279547729_21.docx @ 56649 @ @ 1

Additional Information

Proof of certification is available on request.

Also take note of the information given on the operating and assembly

instructions.

The manual, containing these special conditions for safe use, must be readily

available to the user.

Pos: 37 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1

Содержание 750-461

































































Результаты поиска

Содержание 750-461

Отзывы:

Похожие инструкции для 750-461

Бренды по названию

Популярные бренды

WAGO 750-461, Руководство пользователя

Результаты поиска

Содержание 750-461

Отзывы:

Похожие инструкции для 750-461

Бренды по названию

Популярные бренды