46 Commissioning
WAGO-I/O-SYSTEM 750 XTR
750-404/040-003 Counter Adjust XTR
Manual
Version 1.1.0
Figure 12: Connecting a Conductor to a CAGE CLAMP
®
7
Commissioning
7.1
Parameterization with WAGO-I/O-
CHECK
WAGO-I/O-
CHECK
can be used to select the desired operating mode in the
parameterization dialog specific to the I/O module.
The special features of the individual operating modes are described in the
following sections.
To select the operating mode, proceed as follows:
1.
Right-click the I/O module in the WAGO-I/O-
CHECK
user interface.
A context menu appears.
2.
Select the menu item
Settings
in the context menu.
The parameterization dialog opens:
Figure 13: I/O Module Parameterization Dialog in WAGO-I/O-
CHECK
3.
To select the desired operating mode, click it in the drop-down list.