32 Mounting
WAGO I/O System 750
750-1505 16DO 24VDC 0.5 A, low-side switching
Manual
Version 1.1.0
Public
Once the I/O module has snapped into place, the electrical connections for the
data contacts and power contacts (if any) to the head station or to the preceding
and, if applicable, following I/O module are established.
Pos: 69.12 /Serie 750 ( WAGO I/O SYST EM)/Monti eren/D emonti eren/I/O-M odul entfernen (neutrales 3D) @ 35\mod_1561382848176_21.docx @ 548874 @ 3 @ 1
5.2.2
Removing the I/O Module
1.
Remove the I/O module from the assembly by pulling the release tab.
Figure 9: Removing the I/O Module (Example)
Electrical connections for data or power jumper contacts are disconnected when
removing the I/O module.
Pos: 70 /D okumentation allgemei n/Glieder ungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
