WAGO 750-1423 Скачать руководство пользователя

Страница: 5 / 46

WAGO-I/O-SYSTEM 750

Notes about this Documentation

750-1423 4DI 24V DC 2.0ms, low-side switching, 3-conductor

Manual

Version 1.2.0

Notes about this Documentation

Always retain this documentation!

This documentation is part of the product. Therefore, retain the documentation

during the entire service life of the product. Pass on the documentation to any

subsequent user. In addition, ensure that any supplement to this documentation is

included, if necessary.

1.1

Validity of this Documentation

This documentation is only applicable to the I/O module 750-1423

(4DI 24V DC 2.0ms, low-side switching, 3-conductor).

The I/O module 750-1423 shall only be installed and operated according to the

instructions in this manual and in the manual for the used fieldbus

coupler/controller.

Consider power layout of the WAGO-I/O-SYSTEM 750!

In addition to these operating instructions, you will also need the manual for the

used fieldbus coupler/controller, which can be downloaded at

www.wago.com

There, you can obtain important information including information on electrical

isolation, system power and supply specifications.

This Manual, including all figures and illustrations, is copyright-protected. Any

further use of this Manual by third parties that violate pertinent copyright

provisions is prohibited. Reproduction, translation, electronic and phototechnical

filing/archiving (e.g., photocopying) as well as any amendments require the

written consent of WAGO Kontakttechnik GmbH & Co. KG, Minden, Germany.

Non-observance will involve the right to assert damage claims.

Содержание 750-1423















































Результаты поиска

Содержание 750-1423

Отзывы:

Похожие инструкции для 750-1423

Бренды по названию

Популярные бренды

WAGO 750-1423, Руководство пользователя

Результаты поиска

Содержание 750-1423

Отзывы:

Похожие инструкции для 750-1423

Бренды по названию

Популярные бренды