WAGO-I/O-SYSTEM 750 XTR
Device Description 19
750-1415/040-000 8DI 24VDC 3ms 2-Wire XTR
Manual
Version 1.3.0
Do not exceed maximum values via power contacts!
The maximum current that can flow through the power jumper contacts is 10 A.
The power jumper contacts can be damaged and the permissible operating
temperature can be exceeded by higher current values.
When configuring the system, do not exceed the permissible maximum current
value. If there is a higher power requirement, you must use an additional supply
module to provide the field voltage.
3.2.3
Push-in CAGE CLAMP
®
Connectors
Figure 4: Push-in CAGE CLAMP
®
Connectors
Table 5: Legend for Figure “Push-in CAGE CLAMP
®
Connectors”
Channel Designation Connector Function
1
DI 1
1
Input DI 1: Signal voltage
24 V
9
Input DI 1: Sensor 24 V
2
DI 2
2
Input DI 2: Signal voltage
24 V
10
Input DI 2: Sensor 24 V
.
.
.
7
DI 7
7
Input DI 7: Signal voltage
24 V
15
Input DI 7: Sensor 24 V
8
DI 8
8
Input DI 8: Signal voltage
24 V
16
Input DI 8: Sensor 24 V
