2789-9080
Fieldbus Description
24
| Version: 1.1.0
Communication Module IO-Link
Enable switching the DC output on and off
Bit 3 enables or disables the control of the output via cyclic process data.
Table 30: Enable switching the DC output on and off via cyclic process data
Bit 3
IODD Value
Description
1
active
enabled
0
inactive
disabled
Overload behavior
Bits 6 … 9 control the overload behavior.
Table 31: Overload behavior
Bit 6
Bit 7
Bit 8
Bit 9
IODD Value
Description
1
0
0
0
Constant current
Constant current
0
1
0
0
Constant current (latching mode)
Constant current with latching shut-
down
0
0
1
0
Hiccup mode
Hiccup mode
0
0
0
1
Electronic circuit breaker
Electronic circuit breaker
Latching after thermal overload
Bit 12 controls the latching shutdown in case of thermal overload.
Table 32: Latching after thermal overload
Bit 12
IODD Value
Description
1
active
enabled
0
inactive
disabled
Boost behavior
Bits 13 and 14 control the boost behavior.
Table 33: Boost Behavior
Bit 13
Bit 14
IODD Value
Description
0
0
No Boost
Boost disabled
0
1
TopBoost
TopBoost enabled
1
0
PowerBoost
PowerBoost enabled
1
1
Powe TopBoost
TopBoost and PowerBoost
enabled
4.2.4.8 Configuration of digital input (Index 424)
Enable switching DC output on/off via DI
Bit 0 enables switching on and off the output of the power supply. A LOW level at the DI
means that the output is switched on. A HIGH level at the DI means that the output is
switched off.
Table 34: Enable switching DC output on/off via DI
Bit 0
IODD Value
Description
1
active
enabled
0
inactive
disabled
