WAGO 2789-9080, Руководство по эксплуатации продукта

Страница: 14 / 40

2789-9080 Properties
14 | Version: 1.1.0
Communication Module IO-Link
Property Value
Device ID Depends on the used Power Suppl, see 8 De-
vice IDs of WAGO Power Supplies Pro 2
[
} 33] .
Baudrate 230.4 bit/s (COM 3)
Length PD
IN
5 bytes
Length PD
OUT
1 byte
IO-Link Version 1.1.2
SIO No
Interlock DS Lock, Parameter Access Lock
Data storage Yes
Block parameterization Yes
ISDU Yes
Profiles Common Profile v1.0
Minimum Cycle Time 25.2 ms
3.7.5 Environmental Requirements
Table 9: Technical Data – Environmental Conditions
Property Value
Test voltage (input/output) 1.8 kVAC, 50 Hz, 1 min
Type of insulation Functional insulation
Ambient temperature, operation −25 … +70 °C
Ambient temperature, storage −40 … +85 °C
Relative humidity 5 … 96 % (no condensation)
Operating altitude above sea level, max. 5000 m
Overvoltage category 1 III
Pollution degree according to IEC/EN 60664-1 2
Protection class III (when protective low voltage [SELV] is present
via the IO-Link Master)
Protection type
1
IP20
Isolation 0.63 kV
1
The lower-level WAGO Power Supply Pro 2
3.8 Guidelines, approvals and standards
3.8.1 Guidelines
An EU “Declaration of Conformity” and CE marking exist for the product.
For additional information, visit
ü
www.wago.com .
3.8.2 Approvals
The following approvals have been granted for the product:
Table 10: Approvals
Logo Certification Body Standard
Underwriters Laboratories UL 61010-1