2787-2448
Configuration
46
Product manual | Version: 1.0.0
Power Supply Pro 2
Table 52: Dialog: Settings – Signalization
Section
Parameter
Description
Digital output
DC O.K.
1)
If this box is checked, the digital output is set if the DC
output voltage is OK.
Load current warning level ex-
ceeded
1)
If this box is checked, the digital output is set if the
overload warning threshold is exceeded.
Electronic circuit breaker
tripped
1)
If this box is checked, the digital output is set if the
electronic circuit breaker has tripped.
Power supply switched off
(latched)
1)
If this box is checked, the digital output is set if latching
shutdown occurs.
Digital output via process
data/communication
1)
If this box is checked, the digital output can be con-
trolled via the process data.
Digital output on
If this box is checked, the digital output is switched on.
Inversion
If this box is checked, the digital output is inverted.
Warning thresholds Overload limit active
If this box is checked, a warning is triggered if the
overload warning threshold is exceeded.
Warning threshold
Here you can enter the value for current (unit: mA) at
or above which a warning message is generated.
1)
These parameters are not mutually exclusive and can also be selected simultaneously.
System
Figure 28: Dialog: Settings – System
