2787-2144
Configuration
52
Product manual | Version: 1.0.0
Power Supply Pro 2
Table 57: Display Section: “Measurement Recording”
Pos.
Setting
Description
4
Start time
Here you can enter the time when recording should
start (setting at pos. 1 =
clock
).
End time
Here you can enter the time when recording should
end (setting at pos. 1 =
clock
).
Sample rate
Here you can enter the recording cycle for the mea-
sured values (unit: ms)
With export
•
Box checked: The recording is exported as a CSV
file.
•
Box unchecked: The data is recorded only for on-
line display and not saved.
[Start]
Starts the recording (setting at pos. 1 =
chart
).
[Stop]
Stops the recording before the specified number is
reached (setting at pos. 1 =
chart
).
5
–
This shows the time series for the selected measured
value.
9.3.3.3 Display Section: Information
Figure 33: Display Section: Information
This display section shows information on the connect product.
Table 58: “Information” Display Section
Indicator
Description
Order number:
This shows the order number of the product.
Description:
This shows the manufacturer’s name for the product.
SW-Version:
This shows the current release of the software version (firmware).
HW-Version:
This shows the current release of the hardware version.
