2787-2144
Connection
34
Product manual | Version: 1.0.0
Power Supply Pro 2
Figure 17: Connect Conductor to CAGE CLAMP®
1. To open the CAGE CLAMP
®
, insert the operating tool into the opening above the
connection.
ð
Once you hear a click, the CAGE CLAMP
®
is open.
2. Insert the conductor into the corresponding connection opening.
3. Remove the operating tool to close the CAGE CLAMP
®
.
ð
The conductor is now securely clamped.
6.3 Push-In Termination
The connections for the output can also be wired directly, without using a tool.
The following conductors can be inserted directly:
• Fine-stranded conductors with ferrules and plastic collars for all permissible cross-sec-
tions
• Fine-stranded conductors with ferrules without plastic collars with a cross-section
> 0.5 mm²/AWG 20
• Solid conductors with a cross-section > 0.5 mm²/AWG 20
