WAGNER ZIP52 Finishing Скачать руководство пользователя страница 30

Страница: 30 / 76

Operating manual Pneumatic double diaphragm pump ZIP52 (PF Eco) Finishing
6 Assembly and Commissioning

Order number 2332848 | Edition 08/2020

– Observe national and local regulations for the exhaust air speed.

6.5.2 Air Supply Lines

WARNING

Hose connections!

Risk of injury and damage to the device.

Do not mix up hose connections of product hose and air hose.

Ensure that only dry, clean atomizing air is used in the spray gun! Dirt and moisture in
the atomizing air worsens the spraying quality and spray pattern.

6.5.3 Product Supply Lines

DANGER

Bursting hose, bursting threaded joints!

Danger to life from injection of product.

Ensure that the hose material is chemically resistant to the sprayed products.

Ensure that the spray gun, fittings and product hose between the device and the
spray gun are suitable for the pressure generated in the device.

Ensure that the following information can be seen on the high-pressure hose:

Manufacturer

Permissible operating pressure

Date of manufacture.

6.6 GROUNDING

WARNING

Discharge of electrostatically charged components in atmospheres containing
solvents!

Explosion hazard from electrostatic sparks.

Clean the pump only with a damp cloth.

WARNING

Heavy paint mist if grounding is insufficient!

Risk of poisoning.

Insufficient paint application quality

Ground all device components.

Ground the work pieces to be coated.

Содержание ZIP52 Finishing













































































Результаты поиска

Содержание ZIP52 Finishing

Отзывы:

Похожие инструкции для ZIP52 Finishing

Бренды по названию

Популярные бренды

WAGNER ZIP52 Finishing, Руководство по эксплуатации

Результаты поиска

Содержание ZIP52 Finishing

Отзывы:

Похожие инструкции для ZIP52 Finishing

Бренды по названию

Популярные бренды