WAGNER W 500, Перевод оригинальной инструкции по эксплуатации, Страница: 39 / 78

GB
31
W 500
Problem Cause Remedy
Width of paint
spray cannot be
adjusted
•
Adjustment ring is not connected
to the peg on the air cap
•
Air screen is clogged up
➞
Connect adjustment ring and
peg
➞
Disassemble and clean
Device does not
function
•
Device overheated
➞
Unplug the power plug, let
the device cool down approx.
30 minutes, do not bend the
hose, check the air filter, do
not cover the intake slots
Paint in the
ventilating hose
•
Diaphragm soiled
•
Diaphragm defective
➞
Clean the diaphragm
➞
Replace the diaphragm
Poor covering
capacity on the
wall
•
Spray material is too cold
•
Highly absorbent surface
or paint with poor covering
capacity
•
Distance too large
➞
The material you are spraying
should be at room temperature
➞
Cross spray (Fig. 10)
➞
Closer to the object
24. Technical Data
Technical Data
Max. viscosity: 3300 mPas
Power source: 230 V
~
, 50 Hz
Power consumption: 370 W
Atomizing output: 120 W
Max. delivery rate 375 ml/min
Double insulation:
Sound pressure level*:
80 dB (A); Uncertainty K = 4 dB
Sound pressure output* 93 dB (A); Uncertainty K = 4 dB
Oscillation level: < 2.5 m/s²; Uncertainty K = 1.5 m/s²
Air hose length: 3.5 m
Weight: approx. 3.1 kg
* Measured in accordance with EN 60745-1
Information about the oscillation level
The specified oscillation level has been measured according to a standard test
procedure and can be used to compare against electric tools.
The oscillation level is also for determining an initial assessment of the vibrational strain.