WAGNER TOPFINISH GM 1030P, Руководство по эксплуатации

Страница: 48 / 52

48
VERSION 02/2019 ORDER NUMBER DOC 2397374
TOPFINISH GM 1030P
14 SPARE PARTS
14.1 HOW CAN SPARE PARTS BE ORDERED?
Always supply the following information to ensure delivery of the right spare part:
Order number, designation and quantity
The quantity need not be the same as the number given in the quantity column " " on
the list. This number merely indicates how many of the respective parts are used in each
component.
The following information is also required to ensure smooth processing of your order:
– billing address
– delivery address
– name of the person to be contacted in the event of any queries
– type of delivery (normal mail, express delivery, air freight, courier, etc.).
Identification in spare parts lists
Explanation of column " " (labeling) in the following spare parts lists:
Wearing parts. Wearing parts are not included in the warranty terms.
Included in service set
Note:
These parts are not covered by warranty terms.
Not part of standard equipment, however, available as special accessory.
Explanation of order no. column
-- Item not available as spare part.
/ Position does not exist.
DANGER
Incorrect maintenance/repair!
Danger to life and equipment damage.
Only a WAGNER service center or a suitably trained person may carry out repairs and
replace parts.
Use only WAGNER original spare parts and accessories.
Only repair and replace parts that are listed in the "Spare parts" chapter and that are
assigned to the unit.
Before all work on the device and in the event of work interruptions:
– Relieve the pressure from the spray gun, pressure hoses and all devices.
– Secure the spray gun against actuation.
– Switch off the energy and compressed air supply.
– Disconnect the control unit from the mains.
Observe the operating and service manual for all work.