manualshive.com logo in svg

WAGNER TOPFINISH DD10, Руководство по эксплуатации

Поделиться
Скачать
WAGNER TOPFINISH DD10 Скачать руководство пользователя страница 21

21

VERSION 12/2017

ORDER NUMBER DOC 2366672

TOPFINISCH DD10

6.5 

ASSEMBLY AND INSTALLATION

WARNING

Inclined ground!

Risk of accidents if the device rolls away/falls.

Position the trolley with the double diaphragm pump horizontally.
If the surface is inclined, position the feet of the trolley towards the gradient.
Secure the trolley.

National regulations

Ensure that the national explosion prevention rules and regulations are observed 

when setting up the device.

Procedure:

1. Mount the pump on a frame, trolley 

or wall mount.

2. Connect the suction system and air 

supply.

3. Connect the material and air 

supply of the gun in accordance 

with the operating manual.

B_05376

2

1

3

This pump can be used as part of a spraying system for Airspray applications. The 

components can be found in the accessories list, provided that the system was not obtained 

as a spray pack. The nozzles must be selected according to the spray gun instructions.

6.5.1  VENTILATION 

OF THE SPRAY BOOTH

Operate the device in a spray booth approved for the working materials.

- or -

Operate the device on an appropriate spraying wall with the ventilation (extraction) 

switched on.
Observe national and local regulations for the exhaust air speed.

Содержание TOPFINISH DD10

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды